Requires Radio Control Wireless Commander (FA-WRC1M), Radio Control Wireless Receiver (FA-WRR1) - sold separately and compatible camera and flash.
Max 5 groups in Group mode setting, 3 groups in TTL or Manual mode settings
Require Multi Terminal Connecting ULTI/Micro USB cable VMC-MM1 - sold separately
Commercially-available sync cable required. Flashes of sync voltage of less than 400V is required. Flash types with reversed sync terminal polarity can also be used.
Depending on camera specifications
Although the design is dust and moisture resistant, absolute protection from dust and moisture is not guaranteed.
Flash level controlled over 25 steps (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256) in 1/3 EV step increments. 1/128 not selectable for High Speed Sync. If you are using an HVL-F32M Flash, set the flash level of the group that includes the HVL-F32M to 1/16 or higher when performing High-speed sync (HSS) shooting in MANUAL mode.

© 2016 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony is not responsible for typographical and photographic errors. Features and specifications are subject to change without notice.
Sony the Alpha logo and the Sony logo are trademark of Sony Corporation. All other trademarks are trademarks of their respective owners.

Cart (0 product)

Your cart is currently empty!

Multi Terminal Connecting Cable

Reviews & Questions

Return policy

Frequently Bought Together

Support

Warranty

Recently Viewed